Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Interest & effort check on older Alibre version assembly support

  209 views 4 comments 0 points Most recent by Victor October 2025
• 32 BITS SYSTEM

  114 views 8 comments 0 points Most recent by MikeMcMullen September 2025
• Error message mecwayd.dll not found

  129 views 3 comments 0 points Most recent by hunterswflora September 2025
• Mecway 24 Solver Gives DLL Error

  591 views 21 comments 0 points Most recent by Victor September 2025
• Linear Buckling Analysis of Thin Cylindrical Composite Shell

  106 views 1 comment 0 points Most recent by disla September 2025
• Linear buckling of composite laminate shells

  295 views 11 comments 0 points Most recent by Victor September 2025
• Composites shells

  320 views 7 comments 0 points Most recent by Ropa September 2025
• Orthotropic plate test, input Engineering constants

  180 views 8 comments 0 points Most recent by Mishal September 2025
• Geometry surfaces and selection of elements

  135 views 2 comments 0 points Most recent by Sture September 2025
• Verifying Mecway Results to Ansys Mechanical

  483 views 11 comments 0 points Most recent by disla September 2025
• Mecway on Linux

  3.1K views 40 comments 0 points Most recent by DuaneKaufman August 2025
• Documentation or trial license?

  153 views 2 comments 0 points Most recent by Sergio August 2025
• VM-WB-MECH-011: Large Deflection of a Circular Plate With Uniform Pressure

  129 views 1 comment 0 points Most recent by Victor August 2025
• Table in frequency analysis

  157 views 1 comment 0 points Most recent by Victor August 2025
• Non-axis-aligned beam moment and constraint bugs again #124

  127 views 5 comments 0 points Most recent by Victor August 2025
• Membrane Elements

  152 views 3 comments 0 points Most recent by Victor August 2025
• Triple Shells/Plates structure

  285 views 10 comments 0 points Most recent by Wjasiew July 2025
• Thermal Stress Calculation Failing

  119 views 2 comments 0 points Most recent by gjdoster July 2025
• Visualizing Vector of principal stress

  220 views 1 comment 0 points Most recent by joanm July 2025
• Best Practices for Modeling Bonded Contacts Between Thin Shells?

  173 views 1 comment 0 points Most recent by Victor July 2025
• *ERROR in openfile

  63 views 4 comments 0 points Most recent by disla July 2025
• Change active configuration tab colour

  95 views 1 comment 0 points Most recent by Victor July 2025
• What's the import or open sequence of .frd and .inp files to keep Group information in "Solution"?

  685 views 10 comments 0 points Most recent by runinwind June 2025
• size of tool buttons

  136 views 0 comments 0 points Started by Clive June 2025
• issuses about .frd results format

  90 views 6 comments 0 points Most recent by runinwind June 2025
• Rubber curing

  203 views 3 comments 0 points Most recent by JustinTil June 2025
• Mansions Will Be Part of GTA Online December 2025 DLC

  226 views 0 comments 0 points Started by allencool2025 June 2025
• Questions about stress calculation results

  184 views 2 comments 0 points Most recent by runinwind June 2025
• Contour plot

  130 views 2 comments 0 points Most recent by German June 2025
• New to Mecway....training

  344 views 2 comments 0 points Most recent by JohnM June 2025