Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Linear Buckling Analysis of Thin Cylindrical Composite Shell

  110 views 1 comment 0 points Most recent by disla September 2025
• Linear buckling of composite laminate shells

  298 views 11 comments 0 points Most recent by Victor September 2025
• Composites shells

  323 views 7 comments 0 points Most recent by Ropa September 2025
• Orthotropic plate test, input Engineering constants

  183 views 8 comments 0 points Most recent by Mishal September 2025
• Geometry surfaces and selection of elements

  137 views 2 comments 0 points Most recent by Sture September 2025
• Verifying Mecway Results to Ansys Mechanical

  495 views 11 comments 0 points Most recent by disla September 2025
• Mecway on Linux

  3.2K views 40 comments 0 points Most recent by DuaneKaufman August 2025
• Documentation or trial license?

  157 views 2 comments 0 points Most recent by Sergio August 2025
• VM-WB-MECH-011: Large Deflection of a Circular Plate With Uniform Pressure

  132 views 1 comment 0 points Most recent by Victor August 2025
• Table in frequency analysis

  157 views 1 comment 0 points Most recent by Victor August 2025
• Non-axis-aligned beam moment and constraint bugs again #124

  131 views 5 comments 0 points Most recent by Victor August 2025
• Membrane Elements

  153 views 3 comments 0 points Most recent by Victor August 2025
• Triple Shells/Plates structure

  287 views 10 comments 0 points Most recent by Wjasiew July 2025
• Thermal Stress Calculation Failing

  121 views 2 comments 0 points Most recent by gjdoster July 2025
• Visualizing Vector of principal stress

  232 views 1 comment 0 points Most recent by joanm July 2025
• Best Practices for Modeling Bonded Contacts Between Thin Shells?

  179 views 1 comment 0 points Most recent by Victor July 2025
• *ERROR in openfile

  65 views 4 comments 0 points Most recent by disla July 2025
• Change active configuration tab colour

  103 views 1 comment 0 points Most recent by Victor July 2025
• What's the import or open sequence of .frd and .inp files to keep Group information in "Solution"?

  685 views 10 comments 0 points Most recent by runinwind June 2025
• size of tool buttons

  136 views 0 comments 0 points Started by Clive June 2025
• issuses about .frd results format

  95 views 6 comments 0 points Most recent by runinwind June 2025
• Rubber curing

  212 views 3 comments 0 points Most recent by JustinTil June 2025
• Mansions Will Be Part of GTA Online December 2025 DLC

  234 views 0 comments 0 points Started by allencool2025 June 2025
• Questions about stress calculation results

  196 views 2 comments 0 points Most recent by runinwind June 2025
• Contour plot

  130 views 2 comments 0 points Most recent by German June 2025
• New to Mecway....training

  349 views 2 comments 0 points Most recent by JohnM June 2025
• Bolted Joint Representation

  818 views 3 comments 0 points Most recent by disla June 2025
• Pipe buckling

  241 views 4 comments 0 points Most recent by sofien_73 May 2025
• Help: Thermal Stress Analysis

  131 views 1 comment 0 points Most recent by Victor May 2025
• Multisegment flat spring

  216 views 7 comments 0 points Most recent by cwharpe May 2025