Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Smooth mesh component by component

  79 views 1 comment 0 points Most recent by Victor June 2023
• "see through" colour on contour plot? Or "do not plot" out of range?

  97 views 1 comment 0 points Most recent by Victor June 2023
• Beams from shell expanded with variable node thickness.

  232 views 5 comments 0 points Most recent by disla June 2023
• Beam Forces as Vector plot

  142 views 2 comments 0 points Most recent by kuhl June 2023
• Axial displacement of a supported beam end

  372 views 11 comments 0 points Most recent by disla June 2023
• Latest Netgen is better than previous versions

  633 views 10 comments 0 points Most recent by Victor June 2023
• Modal analysis with point mass and rotational inertia (Lumped mass approach) in CCX

  241 views 7 comments 0 points Most recent by disla June 2023
• Offset for beam element to place stiffeners on thin shell elements

  707 views 14 comments 0 points Most recent by disla June 2023
• Bonded Contact alternative

  328 views 22 comments 0 points Most recent by kuhl June 2023
• I beam torsion modeling

  210 views 6 comments 0 points Most recent by disla June 2023
• Meshing Fails Because of Change of Directory

  87 views 4 comments 0 points Most recent by Victor May 2023
• Dynamic HARMONIC analisys frequency domain

  301 views 7 comments 0 points Most recent by DeAngelis May 2023
• Probe Nodal Values

  65 views 2 comments 0 points Most recent by hooshsim May 2023
• Rayleigh Damping Coefficients

  250 views 3 comments 0 points Most recent by Victor May 2023
• Large Deflection Models

  136 views 2 comments 0 points Most recent by hooshsim May 2023
• Need help with modal stress plots

  82 views 2 comments 0 points Most recent by hooshsim May 2023
• Multiple simulations at the same time

  269 views 13 comments 0 points Most recent by kuhl May 2023
• Concrete block under fire - possible problems with mesh/timestep and convergence

  129 views 6 comments 0 points Most recent by gemada May 2023
• Fracture Mechanics in Mecway

  367 views 3 comments 0 points Most recent by Sebastianmaklary May 2023
• Workflow for large result files

  113 views 4 comments 0 points Most recent by kuhl May 2023
• Layered shells with mixed material models.

  80 views 0 comments 0 points Started by disla May 2023
• Interference fit pressure comparison MECWAY/CALCULIX & ANSYS.

  710 views 10 comments 0 points Most recent by disla May 2023
• Non-linear Contact Modal Analysis with CCX

  131 views 3 comments 0 points Most recent by DeAngelis May 2023
• Principal directions

  149 views 1 comment 0 points Most recent by Victor April 2023
• Strain rate dependency?

  397 views 21 comments 0 points Most recent by disla April 2023
• combination of quasi-static, plastic material and losing contact causes problems

  210 views 10 comments 0 points Most recent by DRQ April 2023
• NLGEOM=NO

  93 views 1 comment 0 points Most recent by Victor April 2023
• Useful Tools

  413 views 2 comments 0 points Most recent by disla April 2023
• contour plot not behaving as expected for contact stress pressure (and some others)

  221 views 6 comments 0 points Most recent by DRQ April 2023
• Version 19.0

  494 views 4 comments 0 points Most recent by JohnM April 2023