Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Topology optimization using Calculix

  1.4K views 15 comments 0 points Most recent by Sebastianmaklary April 2023
• Moving Load over a bridge deck

  172 views 3 comments 0 points Most recent by Victor April 2023
• Cyclic symmetry stepped modes extraction from nodal diameters

  743 views 53 comments 0 points Most recent by Victor April 2023
• Spring Supports

  171 views 2 comments 0 points Most recent by disla April 2023
• Modal Analysis runs w/o error but no results

  635 views 47 comments 0 points Most recent by hooshsim March 2023
• How to block bot registrations

  106 views 2 comments 0 points Most recent by Victor March 2023
• different results between move mesh and importing offset CAD geometry

  122 views 7 comments 0 points Most recent by DRQ March 2023
• Weird behaviour in Shells when using composites

  342 views 17 comments 0 points Most recent by prop_design March 2023
• Bouncing Sphere

  457 views 15 comments 0 points Most recent by disla March 2023
• Water Tight unv Mesh to Volume Mesh

  865 views 44 comments 0 points Most recent by NARAIN March 2023
• Thermal Energy per Element in Transient Analysis

  174 views 6 comments 0 points Most recent by disla March 2023
• selecting face elements

  90 views 2 comments 0 points Most recent by disla March 2023
• Mecway crashing

  383 views 22 comments 0 points Most recent by Sergio March 2023
• Beam elements creation with rotation around an axis

  153 views 3 comments 0 points Most recent by disla March 2023
• Mecway - CalculiX

  143 views 3 comments 0 points Most recent by NARAIN March 2023
• N-S Coupling vs Refinement

  150 views 5 comments 0 points Most recent by JohnM March 2023
• Export Mesh of Selected Components

  84 views 2 comments 0 points Most recent by kuhl March 2023
• Hydrostatic pressure in tank

  149 views 2 comments 0 points Most recent by harryvanlangen February 2023
• UNV import in [mm]

  79 views 2 comments 0 points Most recent by harryvanlangen February 2023
• Custom Refinement

  100 views 2 comments 0 points Most recent by disla February 2023
• Applying a load in the middle of an open part

  198 views 6 comments 0 points Most recent by UGMENTALCASE February 2023
• Volumetric & surface integrals

  97 views 4 comments 0 points Most recent by disla February 2023
• Stress Higher Than Yield?

  223 views 6 comments 0 points Most recent by Victor February 2023
• Beam type B31 is automatically solved by CCX as B31R

  98 views 1 comment 0 points Most recent by Victor February 2023
• Shell Elements - Hinged Support

  148 views 2 comments 0 points Most recent by harryvanlangen February 2023
• Sanity Check on Contacts / Grounding Technique

  177 views 1 comment 0 points Most recent by disla February 2023
• Improvement suggestions

  5.1K views 101 comments 0 points Most recent by disla February 2023
• Axysimmetrical Nonlinear Model

  472 views 4 comments 0 points Most recent by Mariotte February 2023
• Model solid cylinder with brick (hexahedron) elements rather than tet elements?

  359 views 10 comments 0 points Most recent by disla February 2023
• Surface mesh with poor element (nearly colinear nodes)

  182 views 5 comments 0 points Most recent by dculp February 2023