Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• location dependant force

  121 views 4 comments 0 points Most recent by Victor March 2024
• Newb Question - Can't set Material Geometric Properties to Anything Besides Shell/Membrane

  104 views 1 comment 0 points Most recent by cwharpe March 2024
• Open source PDE tools

  124 views 0 comments 0 points Started by Mishal March 2024
• Pressure on a Projected Area

  110 views 2 comments 0 points Most recent by disla March 2024
• Feature: number of copies

  162 views 7 comments 0 points Most recent by Andrea March 2024
• Problem with pressure distribution

  224 views 6 comments 0 points Most recent by JohnM March 2024
• Nonlinear Static 3D with Beam Elements

  174 views 1 comment 0 points Most recent by Victor March 2024
• MAZARS (MAYBE REVISITED ?¿? ) material behaviour

  136 views 1 comment 0 points Most recent by disla March 2024
• Version 24

  959 views 18 comments 0 points Most recent by Victor March 2024
• Stress linearisation

  283 views 8 comments 0 points Most recent by Idriss March 2024
• DRUCKER PRAGER Material Model

  521 views 21 comments 0 points Most recent by FERNANDO March 2024
• Moving loads Analysis. Bridge crane.

  1.1K views 17 comments 0 points Most recent by Andrea March 2024
• ccx + MFRONT

  1.1K views 31 comments 0 points Most recent by FERNANDO March 2024
• Temp issue when used with contacts

  95 views 3 comments 0 points Most recent by Victor February 2024
• Defining shell properties in MW internal analysis

  138 views 3 comments 0 points Most recent by disla February 2024
• Bolt Assembly Example

  2.3K views 17 comments 0 points Most recent by MikeMcMullen February 2024
• Contact general question

  215 views 1 comment 0 points Most recent by Sergio February 2024
• Compression Only Gap Clearance

  108 views 2 comments 0 points Most recent by disla February 2024
• Nonlinear SpringA

  379 views 8 comments 0 points Most recent by JohnM February 2024
• Plastic deformation

  617 views 7 comments 0 points Most recent by Fatmac February 2024
• Wishlist for future versions

  311 views 6 comments 0 points Most recent by German February 2024
• Structured mesh

  506 views 6 comments 0 points Most recent by ing515 February 2024
• DXF input places arcs in an unconnected location

  90 views 1 comment 0 points Most recent by cwharpe February 2024
• convergence tolerances

  168 views 0 comments 0 points Started by Fatmac February 2024
• Interpretation of the reaction forces

  177 views 5 comments 0 points Most recent by Mishal February 2024
• Model of deformed part

  514 views 6 comments 0 points Most recent by JohnM February 2024
• Multiple Material Properties

  237 views 5 comments 0 points Most recent by cfdpro2000 January 2024
• Discontinuity in Sigma2

  123 views 1 comment 0 points Most recent by Victor January 2024
• Forced Convection

  261 views 4 comments 0 points Most recent by Shech January 2024
• FEM Hole Size Correction

  222 views 4 comments 0 points Most recent by DaveStupple January 2024