Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Bad middle edge node position in refine x3 2D

  84 views 3 comments 0 points Most recent by German June 2023
• Sloping BoxBeam CCX Solver Error

  160 views 7 comments 0 points Most recent by cwharpe June 2023
• Smooth mesh component by component

  58 views 1 comment 0 points Most recent by Victor June 2023
• "see through" colour on contour plot? Or "do not plot" out of range?

  84 views 1 comment 0 points Most recent by Victor June 2023
• Beams from shell expanded with variable node thickness.

  204 views 5 comments 0 points Most recent by disla June 2023
• Beam Forces as Vector plot

  125 views 2 comments 0 points Most recent by kuhl June 2023
• Axial displacement of a supported beam end

  343 views 11 comments 0 points Most recent by disla June 2023
• Latest Netgen is better than previous versions

  602 views 10 comments 0 points Most recent by Victor June 2023
• Modal analysis with point mass and rotational inertia (Lumped mass approach) in CCX

  168 views 7 comments 0 points Most recent by disla June 2023
• Offset for beam element to place stiffeners on thin shell elements

  639 views 14 comments 0 points Most recent by disla June 2023
• Bonded Contact alternative

  310 views 22 comments 0 points Most recent by kuhl June 2023
• I beam torsion modeling

  165 views 6 comments 0 points Most recent by disla June 2023
• Meshing Fails Because of Change of Directory

  63 views 4 comments 0 points Most recent by Victor May 2023
• Dynamic HARMONIC analisys frequency domain

  250 views 7 comments 0 points Most recent by DeAngelis May 2023
• Probe Nodal Values

  57 views 2 comments 0 points Most recent by hooshsim May 2023
• Mecway on Linux

  2.8K views 39 comments 0 points Most recent by protontim May 2023
• Rayleigh Damping Coefficients

  175 views 3 comments 0 points Most recent by Victor May 2023
• Large Deflection Models

  113 views 2 comments 0 points Most recent by hooshsim May 2023
• Need help with modal stress plots

  77 views 2 comments 0 points Most recent by hooshsim May 2023
• Multiple simulations at the same time

  259 views 13 comments 0 points Most recent by kuhl May 2023
• Concrete block under fire - possible problems with mesh/timestep and convergence

  119 views 6 comments 0 points Most recent by gemada May 2023
• Fracture Mechanics in Mecway

  325 views 3 comments 0 points Most recent by Sebastianmaklary May 2023
• Workflow for large result files

  95 views 4 comments 0 points Most recent by kuhl May 2023
• Layered shells with mixed material models.

  69 views 0 comments 0 points Started by disla May 2023
• Interference fit pressure comparison MECWAY/CALCULIX & ANSYS.

  628 views 10 comments 0 points Most recent by disla May 2023
• Non-linear Contact Modal Analysis with CCX

  114 views 3 comments 0 points Most recent by DeAngelis May 2023
• Principal directions

  125 views 1 comment 0 points Most recent by Victor April 2023
• Strain rate dependency?

  321 views 21 comments 0 points Most recent by disla April 2023
• combination of quasi-static, plastic material and losing contact causes problems

  197 views 10 comments 0 points Most recent by DRQ April 2023
• NLGEOM=NO

  80 views 1 comment 0 points Most recent by Victor April 2023