Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Different contact application

  277 views 2 comments 0 points Most recent by Abhijit_G_Patil February 2018
• Bonded contact for parts in CAD assembly

  836 views 8 comments 0 points Most recent by Abhijit_G_Patil February 2018
• Beam element + torsion

  304 views 2 comments 0 points Most recent by azr285 February 2018
• Three point bending

  317 views 4 comments 0 points Most recent by Phillip February 2018
• Hydrostatic load - CCX

  362 views 3 comments 0 points Most recent by Tim_Gowing February 2018
• Configurations - Thermal results to static structural analysis

  288 views 3 comments 0 points Most recent by Victor February 2018
• CCX 2.13

  3.1K views 50 comments 0 points Most recent by Andrea February 2018
• How model truss with "rigid" welded clusters, external moments and consider beam-column effects?

  244 views 2 comments 0 points Most recent by SandpointDave February 2018
• Pressure Mapping from CSV file to element set

  317 views 3 comments 0 points Most recent by Victor January 2018
• How create an RGB?

  350 views 5 comments 0 points Most recent by Andrea January 2018
• ERROR - Index was outside the bounds of array

  460 views 4 comments 0 points Most recent by Victor January 2018
• GPU requirement

  226 views 1 comment 0 points Most recent by Victor January 2018
• New Configuration from Old One

  201 views 1 comment 0 points Most recent by Andrea January 2018
• CCX .frd unable to ope in Mecway

  453 views 8 comments 0 points Most recent by Sergio January 2018
• Calculix:Initial Conditions

  970 views 17 comments 0 points Most recent by Victor January 2018
• Calculix tutorial crash

  324 views 1 comment 0 points Most recent by sebih January 2018
• Optimal Settings for Internal Solver

  1.4K views 3 comments 0 points Most recent by Roli January 2018
• Impressed with Mecway

  454 views 2 comments 0 points Most recent by SteveMelton January 2018
• Default names for named selection

  147 views 0 comments 0 points Started by Sergio January 2018
• Rigid body and moment

  724 views 4 comments 0 points Most recent by Kaspars January 2018
• Rayleigh damping causing problem

  504 views 8 comments 0 points Most recent by Victor January 2018
• Skipping initial data in dynamic simulation

  243 views 4 comments 0 points Most recent by Sergio January 2018
• CCX contact - value for friction stick slope and slope of pressure overclosure curve

  633 views 2 comments 0 points Most recent by Roli January 2018
• Can't seem to add a hole

  139 views 2 comments 0 points Most recent by UGMENTALCASE January 2018
• Importing partioning mesh

  388 views 9 comments 0 points Most recent by Victor January 2018
• Exporting stress linearization result table

  283 views 3 comments 0 points Most recent by Sergio January 2018
• Inconsistent results between full 3D (360 deg.) and one-quadrant (90 deg.) models in dynamic 3D

  189 views 2 comments 0 points Most recent by suktan January 2018
• Impact but no visible stresses

  321 views 3 comments 0 points Most recent by Victor January 2018
• CCX Post processing problem

  590 views 11 comments 0 points Most recent by Sergio January 2018
• Multiple curves in timeline and zoom-in/out capability

  134 views 2 comments 0 points Most recent by suktan January 2018