Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Gmsh meshing failed

  867 views 8 comments 0 points Most recent by German October 2017
• Load conditions and their combinations

  220 views 1 comment 0 points Most recent by Victor October 2017
• Horizontal lifeline modelling

  1.7K views 2 comments 0 points Most recent by gemada October 2017
• Examine Stress Section Through Model

  530 views 8 comments 0 points Most recent by davefo September 2017
• Mooney-Rivlin material constants

  600 views 5 comments 0 points Most recent by 3rav September 2017
• What analysis would you do?

  390 views 6 comments 0 points Most recent by mike September 2017
• Transient simulation in Dynamic Response 3D Analysis

  239 views 2 comments 0 points Most recent by suktan September 2017
• Negative von Mises stress

  1.3K views 1 comment 0 points Most recent by Victor September 2017
• Netgen documentation/tutorials

  604 views 3 comments 0 points Most recent by Sergio September 2017
• CPU scaling in Mecway/CCX

  865 views 5 comments 0 points Most recent by Sergio September 2017
• Flexible Joint on Beam

  290 views 3 comments 0 points Most recent by Victor September 2017
• Critically damped cantilever beam

  259 views 1 comment 0 points Most recent by Victor August 2017
• Pausing/Saving Partial Simulation

  467 views 9 comments 0 points Most recent by protontim August 2017
• Multiple selection

  158 views 1 comment 0 points Most recent by Victor August 2017
• Rigid link

  385 views 1 comment 0 points Most recent by Victor August 2017
• extra edges

  276 views 2 comments 0 points Most recent by johnhcole August 2017
• Running *CENTRIF in CCX and using Mecway for postprocessing

  681 views 9 comments 0 points Most recent by Victor August 2017
• Constraint to model interference fit?

  1.1K views 12 comments 0 points Most recent by Rusticus August 2017
• symmetry boundary condition

  741 views 7 comments 0 points Most recent by Rusticus August 2017
• Failure criterion - CCX versus internal solver

  266 views 2 comments 0 points Most recent by Rusticus August 2017
• "Deep" (non-surface) selection of elements

  353 views 5 comments 0 points Most recent by Rusticus August 2017
• Neuber stress correction

  262 views 1 comment 0 points Most recent by Victor August 2017
• Joining more mesh

  568 views 10 comments 0 points Most recent by Andrea August 2017
• Concrete slab

  450 views 2 comments 0 points Most recent by szicsa August 2017
• Non linear CCX Analysis - Bilinear isotropic hardening

  577 views 5 comments 0 points Most recent by marco August 2017
• Non linear time step

  332 views 7 comments 0 points Most recent by Sergio August 2017
• Option to keep results outside .liml file?

  188 views 2 comments 0 points Most recent by Sergio August 2017
• After a bit of guidance please

  378 views 7 comments 0 points Most recent by UGMENTALCASE August 2017
• ZZS improved stress

  333 views 8 comments 0 points Most recent by Victor August 2017
• Message error in inhomogeneous boundary conditions

  151 views 4 comments 0 points Most recent by Victor July 2017