Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Proposal for improvement

  614 views 14 comments 0 points Most recent by Sergio September 2016
• Plate on Angles model analysis error

  324 views 7 comments 0 points Most recent by davefo September 2016
• Some Proposal for your consideration

  210 views 4 comments 0 points Most recent by Victor September 2016
• Error opening liml file after manually editing.

  286 views 2 comments 0 points Most recent by davefo September 2016
• bonded contact

  592 views 4 comments 0 points Most recent by Sergio September 2016
• V.Misses stress across components

  246 views 2 comments 0 points Most recent by davefo September 2016
• Three Point Bending Constraints

  3.2K views 34 comments 0 points Most recent by Victor September 2016
• Beam section to solid

  268 views 3 comments 0 points Most recent by Victor September 2016
• where's master nodes in constraint equation?

  1.4K views 7 comments 0 points Most recent by Victor September 2016
• Input file writting

  189 views 2 comments 0 points Most recent by Sergio September 2016
• signing in to the forum

  120 views 2 comments 0 points Most recent by DaveStupple August 2016
• Heat flux at plane of symmetry

  294 views 1 comment 0 points Most recent by Victor August 2016
• Command Line CCX

  311 views 1 comment 0 points Most recent by Victor August 2016
• Beam on Plate

  1K views 9 comments 0 points Most recent by VMH August 2016
• Simply supported beam

  204 views 1 comment 0 points Most recent by Victor August 2016
• Object collision

  608 views 12 comments 0 points Most recent by Yellow_cloth August 2016
• Simulating conduction on concrete cross sec

  102 views 1 comment 0 points Most recent by Victor August 2016
• General Section

  282 views 4 comments 0 points Most recent by hclcruz August 2016
• Beam Element to Solid Element in CCX

  1.2K views 14 comments 0 points Most recent by davefo August 2016
• line3 elements

  102 views 1 comment 0 points Most recent by Victor August 2016
• Default units

  127 views 2 comments 0 points Most recent by hclcruz August 2016
• possible node selection bug

  87 views 1 comment 0 points Most recent by Victor August 2016
• Report generator?

  298 views 5 comments 0 points Most recent by davefo August 2016
• Move/Copy - Cylindrical Coordinate System Problem

  298 views 4 comments 0 points Most recent by apadzak August 2016
• Applied pressure and traction to vary with Z dimension - Silo analysis

  479 views 7 comments 0 points Most recent by Tim_Gowing August 2016
• Meshing error visibility

  252 views 6 comments 0 points Most recent by DaveStupple August 2016
• Featured example #01 - Dental implant finite element analisys

  293 views 1 comment 0 points Most recent by Sergio July 2016
• CCX output file/Solver issue

  782 views 9 comments 0 points Most recent by Victor July 2016
• Default name for meshed components from step files

  142 views 5 comments 0 points Most recent by Victor July 2016
• Multiple selection of faces in geometry view

  112 views 2 comments 0 points Most recent by Sergio July 2016