Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• CCX modal mass with density / with lumped masses

  343 views 4 comments 0 points Most recent by Victor April 2021
• Better view of geometry edges for imported step file?

  61 views 0 comments 0 points Started by dculp April 2021
• Problem with transforms in DisplacementCylindrical.liml

  126 views 3 comments 0 points Most recent by prop_design April 2021
• Zoom and wheel rotation direction

  87 views 1 comment 0 points Most recent by prop_design April 2021
• How to set the color bar's min value to zero?

  57 views 1 comment 0 points Most recent by Victor April 2021
• 3D model - all loads and constraints disappear after mesh generation

  92 views 1 comment 0 points Most recent by Victor April 2021
• How to inquire - number of nodes and elements

  106 views 3 comments 0 points Most recent by JohnM April 2021
• Coreform Cubit mesh import

  380 views 5 comments 0 points Most recent by Victor April 2021
• Bugs with offset shells and CCX

  99 views 0 comments 0 points Started by Victor March 2021
• Use of IA-FEMESH in Mecway

  188 views 2 comments 0 points Most recent by Aftab March 2021
• Add Surfaces to Named Selection

  121 views 0 comments 0 points Started by A_Proger March 2021
• Salome not saving

  1.1K views 15 comments 0 points Most recent by mmartin March 2021
• Exporting results for posterior validation

  110 views 3 comments 0 points Most recent by pasquinade March 2021
• Multiply Table values to get fretting damage parameter and reading back into Mecway to plot

  108 views 1 comment 0 points Most recent by Victor March 2021
• Disable shell offset while seeing element faces

  121 views 1 comment 0 points Most recent by Victor March 2021
• Reaction force from quasi-static solution

  243 views 10 comments 0 points Most recent by DaveStupple March 2021
• Heat flow not appearing in results

  104 views 3 comments 0 points Most recent by Victor March 2021
• Tuned Vibration Absorber

  297 views 8 comments 0 points Most recent by Hengre February 2021
• Modeling (ridiculously) complex rigging

  286 views 3 comments 0 points Most recent by Victor February 2021
• Stress Verification at Boundary Singularities

  206 views 5 comments 0 points Most recent by Victor February 2021
• CCX Error "Too Many Cut backs, best solution and residuals are in the frd file"

  859 views 8 comments 0 points Most recent by Aftab February 2021
• Assignment to tension-only beam elements

  168 views 2 comments 0 points Most recent by sed February 2021
• Frequency Response Analysis

  389 views 3 comments 0 points Most recent by Victor February 2021
• Dealing with Geometry

  665 views 5 comments 0 points Most recent by Mishal February 2021
• Modeling Compression Only Support in Buckling and Non Linear

  292 views 5 comments 0 points Most recent by rwhirley February 2021
• Mass and DoF outputs don't match

  191 views 6 comments 0 points Most recent by Victor February 2021
• OT Translation

  206 views 4 comments 0 points Most recent by cwharpe January 2021
• Unexpected phenomena at end of beams

  264 views 7 comments 0 points Most recent by cashan January 2021
• RC beam nonlinear with Mohr-Coulomb

  372 views 4 comments 0 points Most recent by gemada January 2021
• Radiation Heating of Tube

  363 views 8 comments 0 points Most recent by DaveStupple January 2021